Localnode.revision; Localnode.serialno - Keithley 2651A Reference Manual

Section 7: Command reference
Details
If you want to reset a specific instrument or a subordinate node, use the
A local node reset includes:
•
Source-measure unit (SMU) attributes affected by a SMU reset are reset
• Other settings are restored back to factory default settings
A
localnode.reset()
Example
localnode.reset()
Also see
reset() (on page 7-151)
smuX.reset()

localnode.revision

This attribute stores the firmware revision level.
Type TSP-Link accessible
Attribute (R) Yes
Usage
revision = localnode.revision
revision
Details
This attribute indicates the firmware revision number currently running in the instrument.
Example
print(localnode.revision)
Also see
localnode.description
localnode.model

localnode.serialno

localnode.serialno
This attribute stores the instrument's serial number.
Type TSP-Link accessible
Attribute (R) Yes
7-138
Model 2651A High Power System SourceMeter® Instrument Reference Manual
is different than a
(on page 7-209)
Affected by
Not applicable
Firmware revision level
(on page 7-133)
(on page 7-134)
(on page 7-138)
Affected by
Not applicable
node[
because
reset() reset()
Resets the local node.
Where saved
Not applicable
Outputs the present revision level. Sample output:
1.0.0
Where saved
Not applicable
command.
].reset()
X
resets the entire system.
Default value
Not applicable
Default value
Not applicable
2651A-901-01 Rev. A / March 2011