Keithley 2651A Reference Manual page 39

Model 2651A High Power System SourceMeter® Instrument Reference Manual
The following table contains descriptions of the main menu items, as well as cross-references to
related information. To access a menu item, press the MENU key, turn the navigation wheel
move the cursor to select the desired item, and press the navigation wheel
Menu selection
SCRIPT
- LOAD
- SAVE
SETUP
- SAVE
- RECALL
- POWERON
GPIB
- ADDRESS
- ENABLE
LAN
- STATUS
- CONFIG
- APPLY_SETTINGS Applies changes made using the CONFIG menu
- RESET
- ENABLE
RS232
- BAUD
- BITS
- PARITY
- FLOW-CTRL
- ENABLE
TSPLINK
- NODE
- RESET
UPGRADE
DISPLAY
- TEST
- NUMPAD
DIGOUT
- DIG-IO-OUTPUT
- WRITE-PROTECT
BEEPER
- ENABLE
- DISABLE
2651A-901-01 Rev. A / March 2011
Description
Saves and recalls users scripts
Loads scripts into nonvolatile memory
Saves scripts
Saves and recalls user and factory setup options
Saves user setup options
Recalls user setup options
Sets the configuration used during startup
Configures the GPIB interface options
Configures the address for the GPIB interface
Enables and disables the GPIB interface
Configures the local area network (LAN)
Displays LAN connection status
Configures the LAN IP address and gateway
Restores the default settings
Enables and disables the LAN interface
Controls the options for the RS-232 interface
Sets the baud rate
Configures the number of bits
Sets the parity
Configures the flow control
Enables and disables the RS-232 interface
Configure the instrument in a TSP-Link
Selects the instrument node identifier
Resets the TSP-Link network
Upgrades the firmware from a USB flash drive
Accesses display functions
Runs the display test
Enables and disables the numeric keypad
Controls digital outputs
Selects the digital I/O values
Write-protects specific digital I/O lines
Controls the key beeps
Enables the key beeps
Disables the key beeps
For more information,
see:
Manage scripts
6-3)
User setup
Communications
Interfaces
LAN concepts and settings
(on page C-1)
Communications
Interfaces
®
network TSP-Link system
expansion interface
page 6-47)
Upgrading the firmware
(on page A-4)
Front panel tests
A-2)
See Numeric entry method
in Setting a value
2-20)
Digital I/O
General operation
page 2-1)
Section 2: General operation
to
.
(on page
(on page 2-39)
(on page 2-73)
(on page 2-73)
(on
(on page
(on page
(on page 3-83)
(on
2-17