Viewing Lan Status Messages - Keithley 2651A Reference Manual

Appendix C: LAN concepts and settings

Viewing LAN status messages

To view the LAN status messages:
1. From the front panel, press MENU key, and then select LAN > STATUS > CONFIG/FAULT.
2. Press the ENTER key.
There are two types of LAN status messages:
•
LAN fault messages: Communicates issues related to physical connectivity.
•
LAN configuration messages: Communicates issues or events related to configuration.
The following table displays possible fault and configuration messages.
LAN CONFIG/FAULT messages
LAN message type
LAN fault
LAN configuration
C-12
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Figure 123: LAN CONFIG/FAULT (Series 2650)
Lan Configuration
Closed
7 8 9 +/-
SRC MEAS LIMIT MODE
DISPLAY
4 5 6 0
POWER
DIGITS SPEED REL FILTER
CONFIG CONFIG NF LOCAL
1 2 3 0000
LOAD RUN STORE RECALL TRIG MENU
Possible messages
Could not acquire IP address
Duplicate IP address detected
DHCP lease lost
Lan Cable Disconnected.
Starting DHCP Configuration.
DHCP Server Not Found.
DHCP configuration started on xxx.xxx.xxx.xxx
Searching for DNS server(s).
Starting DLLA Configuration.
DLLA Failed.
DLLA configuration started on xxx.xxx.xxx.xxx
Starting Manual Configuration.
Manual configuration started on xxx.xxx.xxx.xxx
Closed
2651A SYSTEM SourceMeter ®
AUTO ARM
CURSOR
AUTO
EXIT ENTER
OUTPUT ON/OFF
2651A-901-01 Rev. A / March 2011