Section 7: Command reference
smuX.trigger.PULSE_COMPLETE_EVENT_ID
This constant contains the pulse complete event number.
Type
TSP-Link accessible
Constant
Yes
Usage
eventID = smuX.trigger.PULSE_COMPLETE_EVENT_ID
eventID
X
Details
Set the stimulus of any trigger event detector to the value of this constant to have it respond to pulse complete
events from this SMU.
Also see
Triggering
(on page 3-32)
7-240
Model 2651A High Power System SourceMeter® Instrument Reference Manual
Affected by
The pulse complete event number
SMU channel (for example, smua.trigger.PULSE_COMPLETE_EVENT_ID
applies to SMU channel A)
Where saved
Default value
2651A-901-01 Rev. A / March 2011