Enable Intermediate-Path Performance Monitoring; Figure 7-3 Ippm Provisioned For Sts 1 On An Oc-12 Card - Cisco ONS 15327 User Documentation

Provisioning IPPM
Figure 7-3
After enabling IPPM, performance is displayed on the Performance tab for the OC-48 card. IPPM
enables per-path statistics for STS CV-P (coding violations), STS ES-P (errored seconds), STS FC-P
(failure count), STS SES-P (severely errored seconds), and STS UAS-P (unavailable seconds).
Additional rows will appear in the table on the STS IPPM subtab as circuits are created. After the circuits
are created, you can enable each for IPPM collection. See
definition of every parameter.
Procedure: Enable Intermediate-Path Performance Monitoring
If the STS circuit does not exist, create the circuit. (The circuit must pass through the OC-N card before
Step 1
you can enable IPPM on the circuit.)
In CTC, open the card view of an OC-N card that carries the circuit.
Step 2
Select the Provisioning > STS tabs.
Step 3
Click Enable IPPM for the STS you want to monitor.
Step 4
Click Apply.
Step 5
Cisco ONS 15327 User Documentation, R3.3
7-16
IPPM provisioned for STS 1 on an OC-12 card
Chapter 7
Chapter 8, "Performance Monitoring"
Card Provisioning
for a
June 2002