Chapter 9 Monitoring The System; Snmp Notifications; Monitoring System Status And Performance - Cisco ASR 5500 Administration Manual

Monitoring the System
This chapter provides information for monitoring system status and performance using the show commands
found in the Command Line Interface (CLI). These command have many related keywords that allow them
to provide useful information on all aspects of the system ranging from current software configuration through
call activity and status.
The selection of keywords described in this chapter is intended to provide the most useful and in-depth
information for monitoring the system. For additional information on these and other show command
keywords, refer to the Exec Mode show Commands chapter of the Command Line Interface Reference.
•
•
•
•

SNMP Notifications

In addition to the CLI, the system supports Simple Network Management Protocol (SNMP) notifications that
indicate status and alarm conditions. Refer to the SNMP MIB Reference for a detailed listing of these
notifications.

Monitoring System Status and Performance

This section contains commands used to monitor the status of tasks, managers, applications and other software
components in the system. Output descriptions for most of the commands are located in the Statistics and
Counters Reference.
Table 7: System Status and Performance Monitoring Commands
To do this:
View Administrative Information
Display Current Administrative User Access
SNMP Notifications, page 111
Monitoring System Status and Performance, page 111
Clearing Statistics and Counters, page 113
Monitoring ASR 5500 Hardware Status, page 113
C H A P T E R
Enter this command:
ASR 5500 System Administration Guide, StarOS Release 19
9
111