Before You Begin - Cisco S170 Web Quick Start Manual

Revised: March 13, 2013
Part Number: 78-19643-04
1
Welcome
Thank you for choosing the Cisco S170 Web Security Appliance
(Cisco S170). The Cisco S170 helps organizations secure and
control web traffic.
This guide describes how to physically install the Cisco S170
appliance and use the System Setup Wizard to configure basic
settings. You can also refer to the "Deployment" chapter in the
Cisco IronPort AsyncOS for Web User Guide for information
about how to configure appliance settings.
2

Before You Begin

Before you begin the installation, make sure that you have the
items needed. The following items are included with the Cisco
S170 Web Security Appliance:
• Quick Start Guide (this guide)
• Rails and adaptor kit
• Power cable(s)
• Ethernet cable for connecting the appliance to your
network
• Regulatory Safety and Compliance Information
You will need to provide the following items yourself:
• Rack cabinet enclosure (if rack-mounting the appliance)
• Phillips-head screwdriver for assembling rails
• 10/100 Gigabit Base-T TCP/IP LAN
• Desktop or laptop computer
• Web browser (or SSH and terminal software)
• Network and administrator information for the
Network Settings" section on page 3
configuration
2
"Document
and "go live"