Rear Gate Latch Lock Actuator - Subaru Impreza 2002 Service Manual

SECURITY AND LOCKS
14.Rear Gate Latch Lock Actua-
tor
A: REMOVAL
1) Remove the rear gate latch assembly. <Ref. to
SL-27, REMOVAL, Rear Gate Latch Assembly.>
2) Loosen the two screws to remove rear gate lock
actuator.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the lock works properly after installation.
C: INSPECTION
1) Disconnect the door lock actuator harness con-
nector.
2) Connect the battery to door lock actuator termi-
nals.
2 1
Terminal No.
No. 1 (+) and No. 2 (–)
No. 2 (+) and No. 1 (–)
If NG, replace the rear gate latch lock actuator.

REAR GATE LATCH LOCK ACTUATOR

BO0113
2 1
BO0191
Actuator operation
Unlocked → Locked
Locked → Unlocked
SL-28