Rear Gate Latch Lock Actuator - Subaru Legacy 2003 Service Manual

14.Rear Gate Latch Lock Actua-
tor
A: REMOVAL
1) Remove the rear gate latch assembly. <Ref. to
SL-28, REMOVAL, Rear Gate Latch Assembly.>
2) Remove the rear gate lock actuator.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the lock works properly after installation.
C: INSPECTION
1) Disconnect the door lock actuator harness con-
nector.
2) Connect the battery to the door lock actuator ter-
minals.
2 1
4 3
Terminal No.
No. 2 (+) and No. 4 (–)
No. 4 (+) and No. 2 (–)
If NG, replace the rear gate latch lock actuator.

REAR GATE LATCH LOCK ACTUATOR

SL-00083
2 1
4 3
SL-00076
Actuator operation
Unlocked → Locked
Locked → Unlocked
SL-29
SECURITY AND LOCKS