Data Matrix, Print Data - SATO M-8400RV Operator And Technical Reference Manual

Section 4. Programming Reference
Two-Dimensional Bar Codes

Data Matrix, Print Data

Command Structure
Command Function
Printer Input
Printer Output
Special Notes
Page 4-102
<ESC>DCxx...x
xx...x = Data, maximum of 500 characters
Example: <ESC>DC00006000
Placement: Immediately following the <ESC>BC Data Format
designation command or the <ESC>FX Sequential
Numbering command.
Default: None
To print a Data Matrix two-dimensional bar code image on a label.
<ESC>A
<ESC>%0<ESC>V0100<ESC>H0100<ESC>BX05051010000000001
<ESC>DCDATA MATRIX DATA MATRIX
<ESC>Q1<ESC>Z
1. The maximum amount of data that can be printed with this
command is 500 characters.
2. If an <ESC>BX Data Format designation command contains any
parameters out of the valid range, no symbol will be printed when
this command is sent.
9001041 Rev. D SATO M-8400RV