Esc+D~Esc+D Barcode (Selection Of Hri) - SATO S84EX Programming Reference Manual

60.1 Barcode
60.1 Barcode (Selection of HRI) ESC+D~ESC+d Barcode (Selection
of HRI)
Hexadecimal ESC
code
<1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within item
command
Valid range between item
[Function]
Specifying character type of human readable information (HRI) for barcode.
[Format]
<D>abbcccn~n + <d>n~n
●Parameter
a[Barcode symbology]
b[Narrow bar width]
c[Height of barcode]
n[Print data]
d[Character type specification]
n[Print data]
[Coding Example] Barcode symbology : EAN13
Barcode data : 4902471000793 Character type : XU
HRI data : 4902471000793
<A>
<V>100<H>200<D>3031204902471000793
<XU>4902471000793
<Q>2
<Z>
[Notes]
1. Adds HRI with specified character type.
2. When the data other than specified value is set, printing will not be performed. When the barcode enlargement ratio is small
and character type is large, HRI may be overlapped with each other.
3. The printer will lay out HRI properly.
4. HRI for JAN/EAN8, JAN/EAN13 and UPC-A requires the following terms.
For 8 dots/mm (203 dpi), [02] and [03] would be a proper value of narrow bar width.
For 12 dots/mm (305 dpi), [03] and [04] would be a proper value of narrow bar width.
For 24 dots/mm (609 dpi), [06], [07] and [08] would be a proper value of narrow bar width.
5. HRI will not be printed when barcode is an error for barcode with HRI.
6. When <P> or <L> is specified(<P>02<d>n～n、<L><d>n～n), HRI will not be printed.
D ~ d Parameter
<44> ~ Character type abbcccn~n + <d>n~n
16
The set parameter is not maintained.
The parameter preset will be invalid.
The parameter preset will be invalid.
= 3 : JAN/EAN13
4 : JAN/EAN8
H : UPC-A
= Valid range : 01 to 36 dots
= Valid range : 01 to 999 dots
= Barcode data
= OA
OB
XU
XS
XM
XB
XL
U
S
M
WB
WL
= HRI data
Narrow bar width : 03
ESC+D
~ ESC+d
Height of barcode: : 120
97