Esc+D~Esc+D Barcode (Hri Font) - SATO WS4 Series Programming Reference Manual

Barcode
Available for
WS4 series

ESC+D~ESC+d Barcode (HRI Font)

Barcode (HRI Font)
ESC
Hex code
<1B>
16
Default setting None
When printer is powered off
Persistence of
Validity in a job
the command
Validity after a job
[Function]
Specifies character type of human readable interpretation (HRI) for barcode.
[Format]
<D>abbcccn~n + <d>n~n
● Parameter
a [Barcode type]
b [Narrow bar width]
c [Barcode height]
n [Print data]
d [Character type]
n [Print data]
[Coding example] Barcode type: JAN/EAN-13, Narrow bar width: 02, Barcode height: 120,
Barcode data: 4902471006795, Character type: XS, HRI data: 4902471006795
<A>
<V>100<H>200<D>3021204902471006795
<XS>4902471006795
<Q>2
<Z>
[Notes]
1. Adds HRI characters in specified font.
2. When the data other than specified value is set, printing will not be performed. When barcode enlargement ratio is small and
character type is large, HRI text may be overlapped with each other.
3. Printer will lay out HRI properly.
4. The barcode translation of following codes will be restricted to conditions below: JAN/EAN8, JAN/EAN13, UPC-A
In case of 8 dots/mm (203dpi)
In case of 12 dots/mm (305dpi)
D~+ ESC+d
<44> ~<1B> char. type
16 16
Set parameter will not be retained
Becomes invalid after execution
Becomes invalid after the job
= 3
4
H
= Valid range :
= Valid range :
= Barcode data
= XU
XS
XM
XB
XL
OA
OB
U
S
M
WB
WL
= HRI data
: Appropriate Narrow bar width is [02], [03]
: Appropriate Narrow bar width is [03], [04]
ESC+D ~
Parameter
abbcccn~n+<d>n~n
: JAN/EAN13
: JAN/EAN8
: UPC-A
01 to 12 dots
001 to 999 dots
67
ESC+d