Show The Port Forwarding Table - Digi TransPort WR11 User Manual

Managing networks and connections

Show the port forwarding table

É
Web
Go to Management > Network Status > Port Forwarding Table.
The Port Forwarding Table page displays the Port Forwarding / NAT table. The router uses this table
to keep track of IP packets that have been modified via NAT or NAPT to be routed over a particular
network. When the router receives a response to a previously modified IP packet, it looks up the
matching entry in the Port Forwarding table to correctly modify the response IP packet.
Src IP Address
The source IP address of the modified IP packet.
Dest IP Address
The destination IP address of the modified IP packet.
IP Protocol
The IP protocol field of the modified IP packet.
Src Port
The source TCP/UDP port of the modified IP packet. For ICMP packets, this defines the ICMP Echo
identifier value.
NAPT Port
The new destination TCP/UDP of the modified IP packet. For ICMP packets, this defines the ICMP
Echo identifier value.
Dest Port
The original destination TCP/UDP port of the modified IP packet.
TTL
The time to live, in seconds, for the Port Forwarding entry. The router deletes any entries not in use
during this specified amount of time from the Port Forwarding table.
Command line
Command
nat
Digi TransPort® Routers User Guide
Options Action
list Displays the Port Forwarding / NAT table.
Show network interface status
860