Digi TransPort WR11 User Manual page 757

Configuring security
Remote Peer IP subnet mask
The remote subnet mask parameter. Use with the Remote Peer IP subnet parameter above
to fully qualify the network address for the user.
Public Key file
The name of the file containing the public key for that user. If the public key matches the client
supplied public key, the user is allowed access.
Default WEB page
Sets the default web interface page to open for the user.
3. Click Apply.
Command line
Command Instance Parameter Values
user 0
user 0
user 0
user 0
user 0
user 0
user 0
user 0
Digi TransPort® Routers User Guide
dun_en on, off
phonenum Number
newpwd String
(up to 14
chars)
fieldip IP Address
ipaddr IP Address
mask IP Mask
keyfile Filename
defpage Web page
name
Configure user security settings
Equivalent web parameter
Allow this user to log in over a PPP network
Use this number x when PPP dial-back is
required for this user
Alternate IKE Key
Remote Peer IP address
Remote Peer IP subnet
Remote Peer IP subnet mask
Public Key file
Default WEB page
757