Digi TransPort WR11 User Manual page 862

Hide thumbs Also See for TransPort WR11:
Table of Contents

Advertisement

Managing networks and connections
TTL
The number of seconds for the table entry to live. When this reaches 0, the entry is removed from the
table.
Hits
The number of times an IP packet has been matched against the firewall rule.
Direction
The direction of the IP packets that match the firewall rule.
Src IP Addr
The source IP address of the IP packets that match the firewall rule.
Src Port
The source TCP/UDP port of the IP packets that match the firewall rule.
Dest IP Addr
The destination IP address of the IP packets that match the firewall rule.
Dest Port
The destination TCP/UDP port of the IP packets that match the firewall rule.
Trans. Src IP Addr
If the firewall is configured to modify (such as NAT or NAPT) the source IP address of the IP packets
that match the firewall, this defines the new source IP address of the IP packets.
Trans. Src Port
If the firewall is configured to modify (such as NAPT) the source TCP/UDP port of the IP packets that
match the firewall, this defines the new source TCP/UDP port of the IP packets.
Trans. Dest IP Addr
If the firewall is configured to modify (such as NAT or NAPT) the destination IP address of the IP
packets that match the firewall, this defines the new destination IP address of the IP packets.
Trans. Dest Port
If the firewall is configured to modify (such as NAPT) the destination TCP/UDP port of the IP packets
that match the firewall, this defines the new destination TCP/UDP port of the IP packets.
Protocol
The IP protocol of the IP packets that match the entry.
Digi TransPort® Routers User Guide
Show network interface status
862

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents