Digi TransPort WR11 User Manual page 642

Configuring legacy protocols
13 LF insertion (after CR)
Controls the automatic generation of a Line Feed by the PAD.
Option Description
0 No line feed insertion
1 Line Feeds inserted in data passed TO the DTE
2 Line Feeds inserted in data received FROM the DTE
4 Line Feeds inserted after CRs echoed to DTE
The line feed values can be added together to select Line Feed insertion to any desired combination.
14 LF padding
Some terminal devices, such as printers, require a delay after each Line Feed before they can continue
to process data. This parameter controls the number of padding characters (NUL-ASCII 0) that are
sent after each [LF] to create such a delay.
Option
0
1-255
15 Editing
Enables (1) or disables (0) local editing of data input fields by the PAD before data is sent. The three
basic editing functions provided are character delete, line delete and line re-display.
The editing characters are defined by parameters 16, 17, and 18. In addition, parameter 19
determines which messages are issued to the DTE during editing. When editing is enabled, the idle
timer delay (parameter 4) is disabled. You must use parameter 3 to select the desired data forwarding
condition.
16 Delete character
The edit mode delete character (ASCII 0-127). The default is backspace (ASCII 08).
17 Line delete character
The edit mode line buffer delete character (ASCII 0-127). The default is CTRL-X (ASCII 24).
18 Line redisplay character
The character that re-displays the current input field when in editing mode (ASCII 0-127). The default
is CTRL-R (ASCII 18).
19 Editing PAD service signals
The type of service signal sent to the DTE when editing input fields.
Digi TransPort® Routers User Guide
Description
No line feed padding.
Number of NUL characters inserted after LF
Configure X.25 parameters
642