Digi TransPort WR11 User Manual page 382

Configuring network interfaces
Command Instance Parameter
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
Digi TransPort® Routers User Guide
hrtbeatint
hbipent
hbipadd
hbiproute
hbimsi
hbgps
None
pingsiz
pingip
pingint
pingint2
pingip2
ip2count
pingresp
Configure PPP and external modems
Values Equivalent web parameter
0- Send Heartbeat messages
2147483648 to IP address a.b.c.d every h
hrs, m mins, s secs
Blank, PPP, Use interface x,y for the
ETH source IP address
Blank is
default
Valid Use interface x,y for the
interface source IP address
number
0-
2147483648
off, on Select transmit interface
using the routing table
off, on Include IMSI information in
the Heartbeat message
off, on Include GPS information in
the Heartbeat message
off, on Generate Ping packets on
this interface
0- Send n byte pings to IP host
2147483648 a.b.c.d every h hrs, m mins, s
secs
Valid IP Send n byte ping to IP host
address a.b.c.d every h hrs, m mins, s
a.b.c.d secs
0- Send n byte ping to IP host
2147483648 a.b.c.d every h hrs, m mins, s
secs
0- Send pings every h hrs, m
2147483648 mins, s seconds if ping
responses are not being
received
Valid IP Switch to sending pings to IP
address host a.b.c.d after n failures
a.b.c.d
0- Switch to sending pings to IP
2147483648 host a.b.c.d after n failures
0- Ping responses are expected
2147483648 within s seconds
382