Digi TransPort WR11 User Manual page 329

Configuring network interfaces
É
Web
1. Go to Configuration > Network > Interfaces > Serial > RealPort.
2. Configure RealPort parameters:
Enable RealPort
Enables RealPort on the router.
Listen on port n
The TCP port on which the router will listen for RealPort connections.
Maximum number of sockets
The maximum number of RealPort connections that the router will support.
Enable encrypted RealPort
Selecting this option enables encrypted RealPort on the router.
Encryption mode to listen on port n
The TCP port on which the router will listen for encrypted RealPort connections.
Maximum number of encryption sockets
The maximum number of encrypted RealPort connections that the router will support.
Enable Device Initiated RealPort
Selecting this option enables router to make a RealPort connection to a host PC.
Digi TransPort® Routers User Guide
Configure serial interfaces
329