Digi TransPort WR11 User Manual page 927

Performing device administration tasks
Command Instance
creq 0
creq 0
creq 0
creq 0
creq 0
creq 0
creq command
Use the creq command to generate the certificate request using the configured parameters. If the
private key does not already exist and you enter the appropriate parameters, the private key is
generated at the same time.
To generate a certificate request, enter:
cr eq new - k<pr i v key f i l e> - o<cer t r equest f i l e>
To generate a private key and a certificate request, enter:
cr eq new –b<pr i v key l engt h> - k<pr i v key f i l e> - o<cer t r eq f i l e>
To generate a certificate request file called request.pem from a private key called priv001.pem,
enter:
cr eq new - kpr i v001. pem - o r equest . pem
To generate a 512-bit private key named private.pem, and a certificate request named certreq.pem
using that file, enter:
cr eq new - b512 - kpr i vat e. pem - ocer t r eq. pem
Digi TransPort® Routers User Guide
Parameter Values
locality String
orgname String
org_unit String
email Email Address
unstructname String
digest MD5 or SHA1
Manage X.509 certificates and host key pairs
Equivalent web parameter
Locality (L)
Organisation (O)
Organisational Unit (OU)
E-Mail
Unstructured Name
Digest Algorithm
927