Digi TransPort WR11 User Manual page 713

Configuring system settings
É
Web
1. Go to Configuration >System > Date and Time > Autoset Date and Time.
2. Select Use SNTP to auto-set the system time. The SNTP server parameters appear:
3. Configure the SNTP server parameters:
SNTP server
The hostname or IP address of the desired SNTP server.
Authorisation key #
The SNTP authorization request key number. SNTP allows for authenticating SNTP requests
and responses with a key. These SNTP requests include a key # field allowing the SNTP server
can look up the appropriate key to use in performing the authorization.
Authorisation key
The key to associate with the configured authorization key number.
Check on Power-Up
When checked, causes the router to attempt to connect to the SNTP server every time it
boots.
Update every h hours
The interval, in hours, the router should wait between updating the system clock.
Digi TransPort® Routers User Guide
Set system date and time
713