Digi TransPort WR11 User Manual page 181

Configuring network interfaces
DNS Server / Secondary DNS Server
The IP address of DNS servers the router uses for resolving IP hostnames.
Note If the IP address, Mask, Gateway, DNS server or Secondary DNS server parameters are
specified manually, but the option to use a DHCP server is later selected, any existing manually
specified parameters will override the DHCP supplied parameters. To change from manual
configuration to DHCP, be sure to remove all manually specified parameters first.
3. Click Apply.
Command line
Command Instance
eth n
eth n
eth n
eth n
eth n
eth n
eth n
eth n
eth n
eth n
eth n
eth n
Digi TransPort® Routers User Guide
Parameter Values
descr Free text field
ipaddr Valid IP address
mask Valid Subnet
Mask
gateway IP address
dnsserver IP address
secdns IP address
dhcpcli on, off
ipv6_mode off, wan, lan
ipv6_wan 0, <number of
ipv6_wan
parameter
instances>, 1
ipv6_lan 0, <number of
ipv6_wan
parameter
instances>, 1
vrf integer
vrfexport integer
Configure Ethernet interfaces
Equivalent web parameters
Description
IP Address
Mask
Gateway
DNS Server
Secondary DNS Server
On=Get an IP address automatically
using DHCP
Off=Use the following IP address
Configuration > Network> Interfaces
> IPv6 > ???
Configuration > Network> Interfaces
> IPv6 WAN settings
Configuration > Network> Interfaces
> IPv6 WAN settings
VRF
VRFexport
181