Digi TransPort WR11 User Manual page 807

Configuring security
Enable local authentication if there is no response from the server(s)
Allows local authentication if TACACS+ authentication fails.
Enable TACACS+ Authentication
Enables authentication. When authentication is enabled, user authentication takes place on
the TACACS+ server. When disabled, user authentication takes place locally on the router.
Enable TACACS+ Authorisation
Enables authorization which means that authorization of the application takes place and
authorization of application-related commands also takes place.
Enable TACACS+ Accounting
Enables accounting. Sends accounting messages at the start and end of application sessions,
where applicable, and update messages from command sessions when commands are denied
locally or after they are executed.
3. Click Apply.
Command line
Command
tacplus
tacplus
tacplus
tacplus
tacplus
tacplus
tacplus
tacplus
tacplus
Digi TransPort® Routers User Guide
Instance Parameter
0 svr
0 port
0 key
0 svr2
0 key2
0 localauth
0 authent
0 author
0 acct
Use TACACS+ to control access to the router
Equivalent web
Values parameter
Up to 64 characters Hostname or IP address
for hostname or valid of server
IP address a.b.c.d
0-2147483647 Port
Default 49
Up to 20 characters Server Key
Up to 64 characters Hostname or IP address
or valid IP address of server
a.b.c.d
Up to 20 characters Server Key
off, on Enable local
authentication if there is
no response from the
server(s)
off, on Enable TACACS+
Authentication
off, on Enable TACACS+
Authorization
off, on Enable TACACS+
Accounting
807