Digi TransPort WR11 User Manual page 503

Configuring Virtual Private Networking (VPN)
Renegotiate after h hrs m mins s secs
How long the initial IKE Security Association stays in force. When this time expires, any attempt
to send packets to the remote system results in IKE attempting to establish a new SA.
3. Click Apply.
Command line
Command Instance
ike n
ike n
ike n
ike n
ike n
ike n
ike n
ike n
Configure advanced IKE parameters
É
Web
1. Go to Configuration > Network > Virtual Private Networking (VPN) > IPsec > IKE n >
Advanced.
2. Configure the advanced IKE parameters as needed:
Digi TransPort® Routers User Guide
Parameter Values
encalg des, 3des, aes
keybits 0, 128, 192, 256
authalg md5, sha1
rauthalgs sha256
aggressive on, off
ikegroup 1, 2, 5
ipsecgroup 1, 2, 5
ltime 1-28800
Configure Internet Protocol security (IPsec)
Equivalent web parameter
Encryption
Encryption (AES Key length)
Authentication
PRF Algorithm
Mode
MODP Group for Phase 1
MODP Group for Phase 2
Renegotiate after h hrs m mins s secs
This CLI value is entered in seconds only.
503