Digi TransPort WR11 User Manual page 726

Configuring system settings
SNMP Enterprise Name
The name corresponding to the above Enterprise Number.
Only resolve DNS request for domain
Entering a domain name here restricts DNS requests to the specified domain only.
W-WAN LED to display W-WAN, ISDN/PSTN
On the front panel of the display of models fitted with a W-WAN module, is an LED that you can
use to display the status of the W-WAN module or the status of the PSTN/ISDN connection. Use
the drop-down selection box to choose what the LED displays. The ISDN/PSTN settings depend
upon which of these two options are available on the router.
Serial LED to display Connection, DTR
On the front panel of the router is an LED dedicated to indicating the status of various signals
on the asynchronous serial line. Use the drop-down selection box to choose which signal status
to display. On modules fitted with W-WAN, this LED has additional functionality, you can use this
LED to display the W-WAN signal strength.
3. Click Apply.
Command line
Command Instance Parameter Values
config n
cmd n
snmp n
snmp n
cmd n
cmd n
cmd n
cmd n
Digi TransPort® Routers User Guide
powerup 0, 1
anonftp 0, 1
0=Off (default)
1=On
ftpnatport 0-65535
ent_nb 0-65535
ent_name Free text field
dnsname Valid Domain name, such as
mydomain.org
gprsled_ 0, 1
mode
asyled_ 0, 1
mode
Set miscellaneous system options
Equivalent web parameter
Use Config n when the router
powers up
Allow anonymous FTP login
Additional FTP NAT port
SNMP Enterprise Number
Default 16378
SNMP Enterprise Name
Only resolve DNS request for
domain
W-WAN LED to display W-WAN,
ISDN/PSTN
0=W-WAN
1=ISDN/PSTN
Serial LED to display
Connection, DTR
0=Connection
1=DTR status
2=W-WAN signal strength
726