Using The Reset Button On The Router - Digi TransPort WR11 User Manual

Performing device administration tasks

Using the reset button on the router

Most TransPort routers have a reset button.
TransPort WR11: The reset button is on the far right of the front side panel. See
n
WR11 hardware
TransPort WR21: The reset button is on the front panel, to the right of the Signal LEDs. See
n
TransPort WR21 hardware
TransPort WR31: The reset button is above the USB connector. See
n
features.
TransPort WR41: The reset button is on the underside of the unit. See
n
hardware features.
TransPort WR44: The reset button is on the underside of the unit. See
n
R hardware
TransPort WR44 RR does not have a physical reset button.
n
To reset the router to factory defaults:
1. If the router is not already on, turn the router on and wait 15 seconds for the router to
complete its initialization process.
2. Press and hold the reset button for 5 seconds. The router's LEDs will flash to indicate a factory
reset is in progress. Once the reset is complete, the router automatically reboots.
CAUTION! To avoid corrupting flash memory, do not remove power from the router
during this operation.
Digi TransPort® Routers User Guide
features.
features.
features.
Reset the router to factory defaults
TransPort
TransPort WR31 hardware
TransPort WR41
TransPort WR44 / WR44
937