Digi TransPort WR11 User Manual page 266

Configuring network interfaces
Command Instance Parameter
adsl 0
adsl 0
apvc 0
Additional CLI commands
The following command is not available from the web interface:
adsl 0 debug { 0| 1}
Where 0 is off and 1 causes debugging information to be sent to the CLI.
Digi TransPort® Routers User Guide
Values
usefwfile on, off
watchdog on, off
oammanage on, off
Configure DSL interfaces
Equivalent web parameter
Load DSL firmware from flash
file
Enable watchdog
Manage this PVC using ATM
OAM cells
266