Digi TransPort WR11 User Manual page 911

Performing device administration tasks
Use USB filing system commands
Command line
The USB storage device responds to any of the standard filing system commands. For all filing system
commands, the USB storage device is regarded as drive u:.
Note The router does not support subdirectories. Any subdirectories on the USB device display with a
size of 0 bytes on the Administration > File Management > FLASH Directory page.
Display contents of the USB storage device
Enter the command:
di r u:
SERI ALS. TXT 1843
EVENTL~1. TXT 1449
USB. TXT 4278
M ASSR1~1. TXT 1255
OK
If the USB storage device is empty, the following message is displayed:
No f i l es
If no USB device is present, the following message is displayed:
No USB f l ash di r ect or y
Copy a file
To copy a file named image from the main flash memory onto the USB device, enter the command:
copy i m age u: i m age
To copy a file named Logcodes.TXT from the USB device to the main flash memory, enter the
command:
copy u: Logcodes. TXT Logcodes. TXT
or
copy u: Logcodes. TXT
If no destination file is specified, the destination is set to the FLASH directory and the file name
remains the same.
Digi TransPort® Routers User Guide
Manage files
911