Digi TransPort WR11 User Manual page 695

Configuring alarms
Command line
Command
event
event
Configure the Syslog server to which messages are sent
É
Web
Go to Configuration > Alarms > Event Settings > Syslog Server n.
Syslog Server IP Address
The IP address of the server.
Port
The port to use.
Note The following three items (Mode, TCP timeout, and Route) only appear on routers with
TCP logging software option enabled, which is not a common option.
Digi TransPort® Routers User Guide
Instance Parameter
n syslog_trig
n syslog_max
Configure events to trigger alarms
Equivalent web
Values parameter
0-9 Send a Syslog
message when the
event priority is at
least n.
0-2147483647 Send a maximum
of n Syslog
messages per day.
695