Digi TransPort WR11 User Manual page 638

Configuring legacy protocols
1 PAD recall character
Determines whether PAD recall is enabled. When this facility is enabled, typing the PAD recall
character temporarily interrupts the call and returns you to the PAD> prompt where you may enter
normal PAD commands as required. To resume the interrupted call, use the CALL command without a
parameter. The default PAD recall character is [Ctrl-P]. This may be changed to any ASCII value in the
range 32-125 or disabled by setting it to 0. When a call is in progress and you need to actually transmit
the character that is currently defined as the PAD recall character, simply enter it twice. The first
instance returns you to the PAD> prompt; the second resumes the call and transmits the character to
the remote system.
Option Description
0 Disabled
Digi TransPort® Routers User Guide
Configure X.25 parameters
638