Configure Using Sms Messages For Remote Management - Digi TransPort WR11 User Manual

Configuring remote management

Configure using SMS messages for remote management

The SMS feature supports sending and receiving SMS messages between Remote Manager and a
Remote Manager-registered router. You can use SMS to:
Send an SMS message to the router in order to have the router dynamically establish its EDP
n
connection with Remote Manager
Send user defined data to and from Remote Manager and Remote Manager-registered router
n
Perform limited device management such as pinging the router, as well as provisioning it
n
properly for SMS functionality with Remote Manager
For more information on the SMS feature, see the
É
Web
1. Go to Configuration > Remote Management > Remote Manager > SMS Settings.
2. Set the following values:
Enable Remote Manager SMS
Check this box to enable Remote Manager SMS feature
Enable Opt-in
Enable the opt-in to ensure that you have subscribed to the SMS service. Check this box to
enable opt-in.
Enable Strict Sender
You can enable the Strict Sender mode to ensure that the SMS messages from Remote
Manager are never blocked. Check this box to enable the Strict Sender framework.
Enable responses to be sent to the sender's phone number
Check this box to enable responses to be sent to the sender's phone number.
Accept Remote Manager client connection requests
Enable client connection requests to accept the incoming connections. Check this box to
enable Remote Manager client connection requests.
Accept requests to connect to other Remote Manager servers
Check this box to accept request to connect to other Remote Manager servers.
Override the destination phone number with the following number
Check this box to override the destination phone number with another phone number. Once
you check this box, the phone number text box is enabled. You can enter the phone number in
this text box.
Override the service ID with the following value
Check this box to specify the service ID value. Once you check this box, the service ID text box
is enabled. You can enter your service ID in this text box.
Digi TransPort® Routers User Guide
Use Digi Remote Manager to manage devices
Digi Remote Manager User Guide.
736