Digi TransPort WR11 User Manual page 296

Configuring network interfaces
Command Instance
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
Digi TransPort® Routers User Guide
Parameter Values
IPaddr 0.0.0.0
IPaddr Valid IP address
a.b.c.d
l_addr off, on
When on, allows
negotiation
when off, force
use of specified IP
address
DNSserver Valid IP address
a.b.c.d
secDNS Valid IP address
a.b.c.d
IPmin Valid IP address
a.b.c.d
IPrange 0-255
transDNS Valid IP address
a.b.c.d
sectransDNS Valid IP address
a.b.c.d
ans off, on
cingnb up to 25 digits
do_nat 0, 1, 2
0=Disabled
1=IP address
2=IP address and
port
nat_ip Valid IP address
a.b.c.d
Configure PSTN interfaces
Equivalent web
parameter
Allow the remote device to
assign a local IP address to
this router
Try to negotiate a.b.c.d as
the local IP address for this
router
(in conjunction with l_addr)
Use a.b.c.d as the local IP
address of this router
Use the following DNS
servers if not negotiated
Primary DNS server a.b.c.d
Use the following DNS
servers if not negotiated
Secondary DNS server
a.b.c.d
Assign remote IP addresses
from a.b.c.d to a.b.c.d
Assign remote IP addresses
from a.b.c.d to a.b.c.d
Primary DNS server a.b.c.d
Secondary DNS server
a.b.c.d
Allow this PPP interface to
answer incoming calls
Only allow calling numbers
ending with n
Enable NAT on this interface
IP address/IP address and
Port
NAT Source IP address
a.b.c.d
296