Digi TransPort WR11 User Manual page 372

Configuring network interfaces
Command Instance
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp
ppp n
ppp n
ppp n
ppp n
ppp n
Digi TransPort® Routers User Guide
Parameter Values
ipsecent Default
PPP
Ethernet
ipsecadd Valid interface
number
firewall off, on
qos off, on
use_modem 0, 1
cdma_backoff 0, 1
Default: 1
ndis off, on
nocfg 0, 1, 2, 3
igmp off, on
ifspeed 64000 bps
norxrst off, on
vrf integer
vrfexport integer
Configure PPP and external modems
Equivalent web
parameter
Keep Security
Associations (SAs) when
this PPP interface is
disconnected
Use interface x,y for the
source address of IPsec
packets
Use interface x,y for the
source address of IPsec
packets
Enable the firewall on
this interface
Enable QoS on this
interface
This PPP interface will
use
None
Request packet data
connection
Remote management
access
0=No restrictions
1=Disable management
2=Disable return RST
3=Disable management
and return RST
Enable IGMP
None. CLI command only.
The ppp command
allows configuring the
interface speed for
reporting in SNMP.
None
None. CLI command only.
None. CLI command only.
372