Digi TransPort WR11 User Manual page 359

Configuring network interfaces
Hang-up string
In a typical wireless application the connection to the network is always on and under normal
circumstances it is not necessary to hang-up the wireless module. Under certain
circumstances however, the router may use the ATH command to try and disconnect the
wireless module from the network, such as if an incorrect APN has been specified and the
module is unable to attach to the network correctly.
This parameter allows you to specify an alternative hang-up string that is sent to the wireless
module when disconnecting a call. As with the Initialization strings, it is not necessary to
include the AT as this is inserted automatically by the router.
Post hang-up string
Additional AT commands that are sent to the wireless module after it has been disconnected.
As with the Initialization strings, it is not necessary to include the AT as this is inserted
automatically by the router.
Listening init string
The listening initialization string parameter for external modems.
Listening init interval (secs)
The listening init string is sent at intervals specified by a listening init interval parameter.
Maximum RING count before answering incoming call
The count of the maximum number of rings before answering incoming call can be set in this
field. The default value is 0.
Minimum RING count before answering incoming call
The count of the minimum number of rings before answering incoming call can be set in this
field. The default value is 0.
3. Click Apply.
Command line
Command Instance
modemcc n
modemcc n
modemcc n
modemcc n
modemcc n
modemcc n
modemcc 0
modemcc 0
Digi TransPort® Routers User Guide
Parameter Values
asyport 0-255 (Default: 255)
init_str Free text field
init_str1 Free text field
init_str2 Free text field
hang_str Free text field
posthang_str Free text field
linit_str Free text field
linit_int 0-2147483647
Configure PPP and external modems
Equivalent web parameter
Initialisation string 1
Initialisation string 2
Initialisation string 3
Hang-up string
Post Hang-up string
Listening init string
Listening init interval (secs)
359