Digi TransPort WR11 User Manual page 506

Configuring Virtual Private Networking (VPN)
2. Configure IKE responder parameters as needed:
Enable IKE Responder
Allows the router to respond to incoming IKE requests.
Accept IKE Requests with
Defines the settings that the router will accept during the negotiation
Encryption
The acceptable encryption algorithms.
Authentication
The acceptable authentication algorithms.
MODP Group between x and y
The acceptable range for MODP group.
Renegotiate after h hrs m mins s secs
How long the initial IKE Security Association will stay in force. When the IKE Security
Association expires, any attempt to send packets to the remote system will result in IKE
attempting to establish a new SA.
3. Click Apply.
Command line
Command Instance Parameter
ike 0
ike 0
ike 0
ike 0
Digi TransPort® Routers User Guide
Values
noresp on, off
rencalgs des, 3des, aes
Multiple algorithms can specified in
a comma-separated list
keybits 0, 128, 192, 256
rauthalgs md5, sha1
Multiple algorithms can specified in
a comma-separated list
Configure Internet Protocol security (IPsec)
Equivalent web
parameter
Enable IKE Responder
Encryption
Encryption (Minimum
AES Key length)
Authentication
506