Ping Command: Troubleshoot Connectivity Problems - Digi TransPort WR11 User Manual

Using the command-line interface

ping command: Troubleshoot connectivity problems

Use the ping command to help troubleshoot connectivity problems. The syntax of the ping command
is:
pi ng <i p addr ess| FQDN> [ n]
Where n (if specified) is the number of ICMP echo requests to send. If not specified, only 1 echo
request is sent.
To stop pings when n has been set to a high value, use ping stop.
Digi TransPort® Routers User Guide
Application commands
143