Reset The Router To Factory Defaults; Using The Web Interface - Digi TransPort WR11 User Manual

Performing device administration tasks

Reset the router to factory defaults

Using the web interface

É
Web
1. Go to Administration > Factory Default Settings.
2. (Optional) Select Keep network settings option to preserve certain network settings after
the reset, including:
Ethernet 0 IP address
n
Ethernet 0 Mask
n
Ethernet 0 Gateway
n
Ethernet 0 DHCP Client
n
Ethernet 0 DNS Server
n
Default Route 0 Interface
n
PPP 1 Username
n
PPP 1 Password
n
PPP 3 Username
n
PPP 3 Password
n
Mobile APN
n
Mobile SIM PIN
n
3. Click Restore.
CAUTION! To avoid corrupting flash memory, do not remove power from the router
during this operation.
4. Click Reboot to reboot the router.
Digi TransPort® Routers User Guide
Reset the router to factory defaults
936