Digi TransPort WR11 User Manual page 207

Configuring network interfaces
IP Address
The destination IP address. This parameter is optional. If configured, only packets destined for
this IP address have VLAN tagging applied.
Mask
The destination IP subnet mask. This parameter is optional. If configured, only packets
destined for this IP subnet mask have VLAN tagging applied.
Source IP Address
The source IP address. This parameter is optional. If configured, only packets from this IP
address have VLAN tagging applied.
Source Mask
The source IP subnet mask. This parameter is optional. If configured, only packets from this IP
subnet mask have VLAN tagging applied.
3. Click Apply.
Command line
Command Instance
eth n
vlan n
vlan n
vlan n
vlan n
vlan n
vlan n
Digi TransPort® Routers User Guide
Parameter Values
vlan on, off
vlanid 0-4095
ethctx Integer
ipaddr IP Address
mask IP Mask
srcipaddr IP Address
srcmask IP Mask
Configure Ethernet interfaces
Equivalent web parameter
Enable VLAN support on Ethernet
interfaces
VLAN ID
Ethernet Interface
IP Address
Mask
Source IP Address
Source Mask
207