Digi TransPort WR11 User Manual page 851

Hide thumbs Also See for TransPort WR11:
Table of Contents

Advertisement

Managing networks and connections
Name
The name assigned to the PPP interface.
Uptime
The amount of time the PPP interface has been up.
MRU
The maximum receive unit (MRU) that has been negotiated by each peer on the PPP connection.
ACCM
The Asynchronous Control Character Map (ACCM) that has been negotiated by each peer on the PPP
connection.
VJ Compression
The Van Jacobson (VJ) compression that has been negotiated by each peer on the PPP connection.
Link with Active Entity
The entity this PPP interface is using for connectivity.
IP Address
The IP address assigned to this PPP interface. This could be either statically configured or assigned by
the remote PPP peer.
DNS Server IP Address / Secondary DNS Server IP Address
The primary and secondary DNS server IP addresses the PPP interface is using.
Outgoing Call To
If this is dial-out PPP interface, this is the number for making the call.
Total Data Transferred
The total amount of data bytes received and transmitted on the PPP interface, including PPP headers
and payload.
Total Up Time Today
The total amount of time, in minutes, the PPP interface has been connected in the current 24-hour
period.
Bytes Received
The number of bytes received on the PPP interface.
Bytes Sent
The number of bytes sent on the PPP interface.
LCP Packets Received
The number of Link Control Protocol (LCP) packets received on the PPP interface.
LCP Packets Sent
The number of Link Control Protocol (LCP) packets sent on the PPP interface.
Digi TransPort® Routers User Guide
Show network interface status
851

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents