Digi TransPort WR11 User Manual page 729

Configuring system settings
Command line
Command Instance Parameter Values
pwrctrl 0-3
pwrctrl 0-3
pwrctrl 0-3
pwrctrl 0-3
pwrctrl 0-3
pwrctrl 0-3
pwrctrl 0-3
pwrctrl 0-3
pwrctrl none
Example
To set setting a router's CPU to low-speed and all other power control parameters to off, enter:
pwr ct r l 1 cpuspeed 1
OK
pwr ct r l 1 l eds of f
OK
pwr ct r l 1 et h of f
OK
pwr ct r l 1 gpr s of f
OK
pwr ct r l 1 gps of f
OK
pwr ct r l 1 ?
Par am et er s ar e. .
cpuspeed: 1
l eds: OFF
Digi TransPort® Routers User Guide
cpuspeed 0-3
Available speed values vary by
model
0 = high speed (454 MHz)
1 = low speed (360 MHz)
2
3
leds on, off
eth on, off
gprs on, off
gps on, off
wifi on, off
dsl on, off
The power control profile
act_rq
number.
You can enter this command
immediately after setting the
parameters and is useful
when testing the
functionality. You must save
the profile by entering config
0 save.
status Displays the current active
power control configuration
Set power control options
Equivalent web parameter
CPU Speed
LEDs
Ethernet
Mobile Module
GPS
Wi-Fi
DSL
None - Power control profile is
selected through command
line only.
The Power Control display for
the currently selected power
control profile.
729