Digi TransPort WR11 User Manual page 643

Configuring legacy protocols
Option
0
1
2
20 Echo mask
Defines characters that are not echoed when echo mode has been enabled using parameter 2.
Option
0
1
2
4
8
16
32
64
128
Combinations of the above sets of characters are possible by adding the respective values together.
21 Parity treatment
Sets use of parity generation/checking.
Option
0
1
2
3
22 Page wait
Determines how many line feeds are sent to the terminal before output is halted on a page wait
condition. In other words, it defines the page length for paged mode output. A page wait condition is
cleared when the PAD receives a character from the terminal.
Digi TransPort® Routers User Guide
Description
No editing PAD service signals.
PAD editing service signals for printers.
PAD editing service signals for terminals.
Description
No echo mask (all characters are echoed)
CR
LF
VT, HT or FF
BEL, BS
ESC,ENQ
ACK,NAK,STX,SOH,EOT,ETB,ETX
No echo of characters set by parameters 16, 17 & 18
No echo of characters set by parameters 16, 17 & 18
Description
No parity generation or checking
Parity checking on
Parity generation on
Parity checking and generation on
Configure X.25 parameters
643