Digi TransPort WR11 User Manual page 753

Configuring security
Allow autoexec.bat files to run from Mass Storage Devices
Enables/disables running the autoexec.bat files from the mass storage devices. For additional
details on running autoexec.bat files from mass storage devices, see
storage devices.
Enable "Factory Default" reset button
Enables/disables execution of a complete hardware reset.
3. Click Apply.
Command line
Command Instance
cmd 0
usbcon 0
usbcon 0
cmd 0
Digi TransPort® Routers User Guide
Parameter Values
on, off
encpasswords
Default is off
list of USB ports,
dislist
where:
x=1 for the bottom
USB port and 2 for
the top port.
p=<port #> (if
connected to a USB
hub the port numbers
can increase).
DRIVER=MSD for Mass
Storage Device,
SERIAL for serial
devices, or HUB for
hub devices.
batfile on, off
pbreset on, off
Configure system security settings
Manage files using USB
Equivalent web
parameter
Enable password
encryption
Disable the following USB
devices
Allow autoexec.bat files to
run from Mass Storage
Devices
Enable "Factory Default"
reset button
753