Digi TransPort WR11 User Manual page 371

Configuring network interfaces
Command Instance
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
Digi TransPort® Routers User Guide
Parameter Values
IPrange 0-255
Default 5
transDNS Valid IP address
sectransDNS Valid IP address
cingnb up to 25 digits
msn up to 9 digits
sub up to 17 digits
cli
maxup 0-2147483648
maxuptime 0-2147483647
timeout Default 300s (5
minutes)
timeout2 0-2147483648
rxtimeout 0-2147483648
maxneg 0-2147483648
do_nat 0, 1
0=Off
1=On
natip Valid IP address
a.b.c.d
ipsec 0, 1
0=Off
1=On
Configure PPP and external modems
Equivalent web
parameter
Assign remote IP
addresses from a.b.c.d to
a.b.c.d Note that these
are not directly
equivalent. This address
is obtained by adding the
range value to the
minimum.
Primary DNS server
Secondary DNS server
Only allow numbers
ending with n
with ISDN MSN ending
with n
with ISDN sub-address
ending with n
Close the PPP
connection after s
seconds
if it has been up for m
minutes in a day
if it has been idle for h,
m, s
Alternative idle timer for
static routes s seconds
if the link has not
received any packets for
s seconds
if the negotiation is not
complete in s seconds
Enable NAT on this
interface
NAT Source IP address
a.b.c.d
Enable IPsec on this
interface
371