Digi TransPort WR11 User Manual page 597

Configuring legacy protocols
Command Instance Parameter
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
snaip X
snaip x
snaip x
snaip x
snaip x
snaip x
snaip x
Digi TransPort® Routers User Guide
Configure Systems Network Architecture over IP (SNAIP)
Values
stations text
saps text
dsaps text
send_xid_null 1=enabled,
0=disabled
xid_data text
turntxtim 0-2147483647
dtemode 1=DTE, 0=DCD
n400 0-255
tnoact 1000-60000
t1time 1-60000
t200 1-60000
window 1-7
tinact 0-3000
vmac Text (valid MAC
address)
peervmac Text (valid MAC
address)
IPaddr Text (valid IP
address)
r_IPport 0-65535
w_IPport 0-65535
srcipent auto, eth, ppp
srcipadd 0-255
sock_inact 0-2147483647
ver 0-2
passive 0= active
1=passive
dlswwindow 1-100
udp_cap 1=enabled
0=disabled
Equivalent web parameter
Polling Stations Addresses.
SAPs.
DSAPs(blank=default).
Send Null XID (XID with no Data).
Send XID with Data.
Tx Turn Around Time.
Mode.
N400 counter.
RR Timer.
T1 timer.
T200 timer.
Window Size.
Disconnect link if there has been no
activity forxseconds.
Virtual MAC Address.
Virtual MAC Address of Peer.
IP address of the Peer DLSw unit.
Listen on Port.
Use Port x if this unit starts the
DLSw protocol.
Use interface for source IP address.
Use interface for source IP address.
Close TCP connection if it is idle for
xsecs.
DLSw Ver.
DLSw Role.
DLSw Window.
UDP Capable.
597