Digi TransPort WR11 User Manual page 698

Configuring alarms
Event
This is not a configurable parameter; it is simply the event number, displayed for information only. This
is the number to refer to when filtering events in the event log settings Configuration > Alarms >
Event Settings.
Description
A description of the event code. Clicking on a link in this field brings up the configuration page
associated with that event.
Filter
This parameter is for information only. If event filtering is applied to an event, the associated filter is
shown as On. This is a result of enabling the parameter Do not log this event as described below.
Event Priority
Controls the priority of the event and determines whether an event will trigger email, SMS messages,
or SNMP traps.
Reasons
The reason why the event occurred. Not every event has a list of reasons.
Reason Priority
This parameter is for information only.
Attachment List ID
A fixed list of values for conveniently referring to the associated list of files to attach to an email.
Files
Allows entering a comma-separated list of names for the files that should be attached to an email.
Command line
Command Instance
event n
There are no commands for editing event logcodes. However, you can edit the logcodes.txt file which
holds all the logcode information. For details on how to do this, see
Digi TransPort® Routers User Guide
Parameter Values
syslog_trig ev_filter
Edit event descriptions
Equivalent web parameter
Do not log this event
View and manage the event log.
698