Digi TransPort WR11 User Manual page 538

Configuring Secure Sockets Layer (SSL)
Reject Self-Signed Certificates
When checked, sets that the SSL server rejects zero-depth, self-signed certificates.
3. Click Apply.
Command line
Command Instance Parameter Values
sslsvr 0
sslsvr 0
sslsvr 0
sslsvr 0
sslsvr 0
sslsvr 0
sslsvr 0
Digi TransPort® Routers User Guide
certfile Up to 12 characters (DOS 8.3 format)
keyfile Up to 12 characters (DOS 8.3 format)
ver Blank, TLS1, SSL2
insecure off, on
integer
verify
This value sets several bits in the definition for
the SSL server.
Bit 0 (value 1) indicates that the server should
verify the peer certificate if one is supplied. Bit 1
(value 2) indicates that the certificate dates (not
before, not after) are also checked. Bit 2 (value 4)
indicates that the negotiation should fail if the
peer doesn't supply a certificate. Bit 3 (value 8)
indicates that zero-depth, self-signed certificates
should be rejected. Default is 0.
cipherlist Colon-separated list
debug off, on
Configure the SSL server
Equivalent
web
parameter
Server
Certificate
Filename
Server
Private Key
Filename
SSL Version
Allow
Insecure
Ciphers
Verify
Certificate,
Certificate
Required,
and Reject
Self-Signed
Certificates
Cipher List
n/a
538