Digi TransPort WR11 User Manual page 546

Configuring Secure Shell (SSH) server and client
Authentication Preferences
The following configuration options allocate preferences for the authentication methods. As
above, a value of 0 disables the particular authentication method, and lower values indicated
greater preference than higher values. For example, if MAC SHA1-96 was the preferred method
for authentication, this option would be given the value 1 and the other options given a value of
2 or greater. If all these parameters are set to the same value, the router automatically uses
them in the following order:
SHA1,
n
SHA1-96
n
MD5
n
MD5-96
n
MAC MD5
The preference level for MAC MD5.
MAC MD5-96
The preference level for MAC MD5-96.
MAC SHA1
The preference level for MAC SHA1.
MAC SHA1-96
The preference level for MAC SHA1-96.
Enable Debug
The router supports logging and output of debugging information for situations where there
are problems establishing a SSH connection. When enabled, this setting causes the router to
trace and output information that should be helpful in diagnosing and resolving the problem.
4. Click Apply.
Command line
Command Instance Parameter
ssh 0-7
ssh 0-7
ssh 0-7
ssh 0-7
ssh 0-7
Digi TransPort® Routers User Guide
Values
port 0-65535
nb_listen 0-2147483647
hostkey1 Up to 12 characters
(8.3 format)
hostkey2 Up to 12 characters
(8.3 format)
loginsecs 0-2147483647
Configure SSH servers
Equivalent web parameter
Use TCP port p
Allow up to n connections
Host Key 1 Filename
Host Key 2 Filename
Maximum login time s seconds
546