Digi TransPort WR11 User Manual page 857

Managing networks and connections
Setting Description
IBGP The route is an interior BGP route.
EBGP The route is an exterior BGP route.
OSPF The route is an OSPF route.
Idx
Used for static routes only. The index of the configured static route.
Interface
The interface over which the IP packet will be routed when using the route.
Status
The current status of the route. This setting can be one of the following:
Setting Description
UP The route is up and is ready for use in routing.
DOWN The interface that the route uses is currently down. The interface can be activated if the
route is required.
OOS The interface that the route uses is currently "Out of Service".
Command line
Command Options
route print
route printsrc
Digi TransPort® Routers User Guide
Action
Displays the IPv4 routing table.
Displays the IPv4 routing table with the src addr information.
Show network interface status
857