Digi TransPort WR11 User Manual page 559

Configuring FTP Relay
Remain connected for s seconds after a file has been transferred
How long, in seconds, the router maintains the connection to the FTP host after transferring a
file.
If unable to relay file Delete File / Retain file
These two radio buttons select the behavior with respect to storing the file if the router fails to
connect to the FTP host (after retrying for the specified number of attempts). Select
Delete File if the file should not be stored permanently. If the file is retained, manual
intervention is required to recover it at a later stage.
Note If the file is not retained, it will be lost if the power is removed from the router.
Email the file before storing or deleting it
The configuration options following setting are normally disabled (they should appear disabled
in the browser). When this setting is enabled, the parameters are enabled and you can enter
data in the text boxes.
Use Email Template File
The name of the template file that forms the basis of any email messages generated by the
FTP Relay Agent. This would normally be the standard EVENT.EML template provided with the
router but alternative templates may be created if necessary (see
alert messages when events
To
The email address of the recipient of email messages generated by the FTP Relay Agent.
From
The email address of the router. In order for this to work, an email account must be in place
with the Internet Service Provider.
Subject
A brief description of the content of the email.
3. Click Apply.
Command line
There are two FTP Relay Agents available. On frelay commands, the instance number can be 0 or 1.
Command Instance Parameter
frelay n
frelay n
Digi TransPort® Routers User Guide
occur).
Values
locuser Up to 15
characters
ftphost Up to 64
characters
Configure FTP Relay
Configure sending email
Equivalent web parameter
Relay files for user locuser
to FTP Server ftphost
559