Digi TransPort WR11 User Manual page 461

Configuring IP routing and forwarding
this multicast packet. Otherwise, the router drops the packet, as the packet is likely to be a
copy, and the router has already received the original.
Add button
Adds the multicast route to the IP configuration.
3. Click Add to add each multicast route to the multicast routing table.
4. Click Apply.
Command line
Command Instance Parameter Values
mcast 0-19
mcast 0-19
mcast 0-19
mcast 0-19
mcast 0
Digi TransPort® Routers User Guide
IPaddr Valid IP address a.b.c.d
mask Valid IP address a.b.c.d
ll_ent PPP,ETH,TUN
ll_add Valid interface number 0-
2147483647
mult_spc ON, OFF
Configure multicast routes
Equivalent web parameter
Multicast Address a.b.c.d
Mask a.b.c.d
Interface x,y
Interface x,y
Enable multicast source path
checking
461