Digi TransPort WR11 User Manual page 171

Using the command-line interface
at\smib=mib-2.interfaces.iftable.ifentry.ifspeed: Show interface's current bandwidth
Shows an estimate of the interface's current bandwidth in bits per second. SNAIP and SYNC ports will
always return 0. PPP ports will always return 64000.
For example:
m i b- 2. i nt er f aces. i f t abl e. i f ent r y. i f speed. 1 = 64000
at\smib=mib-2.interfaces.iftable.ifentry.ifphysaddress: Show interface address
Shows the interface's address at the protocol layer immediately below the network layer in the
protocol stack. For interfaces without such an address, a zero-length octet string is returned. For
PPP, SNAIP and SYNC ports, a zero-length string is returned.
at\smib=mib-2.interfaces.iftable.ifentry.ifadminstatus: Show administrative state of an
interface
Shows the desired state of the interface. The testing state (3) indicates no operational packets can be
passed.
at\smib=mib-2.interfaces.iftable.ifentry.ifoperstatus: Show operational state of an interface
The current operational state of the interface. The testing state (3) indicates no operational packets
can be passed.
at\smib=mib-2.interfaces.iftable.ifentry.ifinoctets: Show number of octets on an interface
Shows the total number of octets received on this interface, including framing characters.
at\smib=mib-2.interfaces.iftable.ifentry: Show unicast packets delivered by an interface
Shows the number of subnetwork-unicast packets delivered by this interface to a higher-layer
protocol.
at\smib=mib-2.interfaces.iftable.ifentry.ifinnucastpkts: Show non-unicast packets delivered by
an interface
Shows the number of non-unicast (such as broadcast or multicast) packets delivered by this interface
to a higher-layer protocol.
at\smib=mib-2.interfaces.iftable.ifentry.ifinerrors: Show packets received on an interface
containing errors
Shows the number of inbound packets received by this interface that contained errors preventing
them from being delivered to a higher-level protocol.
at\smib=mib-2.interfaces.iftable.ifentry.ifoutoctets: Show octets transmitted by an interface
Show the total number of octets transmitted by this interface, including framing characters.
at\smib=mib-2.interfaces.iftable.ifentry.ifoutucastpkts: Show number of transmitted unicast
packets
Shows the total number of packets that higher-level protocols requested this interface to transmit to
a subnetwork-unicast address, including those that were discarded or not sent.
at\smib=mib-2.interfaces.iftable.ifentry.ifoutnucastpkts: Show number of transmitted non-
unicast packets
Shows the total number of packets that higher-level protocols requested this interface to transmit to
a non-unicast (such as broadcast or multicast) address, including those that were discarded or not
Digi TransPort® Routers User Guide
AT commands
171